Work at heights culture
Published: 9th Oct 2019
Leading edges, sharp edges, hot works & chemicals, UV
As a subject which is not solely found in Work at Heights, creating a ‘Safety Culture’ is one of the trickiest factors to handle. As this is a Work at Heights article we will use Fall Protection as examples.
We often find ourselves providing clients with reports of their site which indicate what seems at first, to be dis-interest from employees to wear the required safety equipment (harness and lanyard). We often find the people required to perform their duties at heights at loggerheads with the safety people on site.
It is sad when the report is shared and discussed with the safety team to hear them blaming this on the employees. The general reasons we hear is ‘They don’t care if they die’ – This is not good enough from the safety person.
We understand someone cannot be forced to wear a harness or connect safely. At the same time we fully understand that someone can be sent for training and this results in little or no change in their safety behaviour. The previously mentioned comment is the easy way out though.
Let’s think about this from a practical perspective. I am employed to change light bulbs on a site. I understand that I can change a light bulb in less than 2 minutes – If the lightbulb was right in front of me. Unfortunately lights are generally positioned high up on ceilings so this adds a challenge to the duty I have been hired to perform. I now require an entire list of legal compliance boxes to be ticked, where at the end of the day this box ticking does not assist me with getting up there safely – It just makes sure I keep the person in charge of safety off my back.
When this approach is taken we see a common occurrence. The boxes which need to be ticked were the same documents I had approved at the last 20 companies I changed bulbs for which goes hand-in-hand that the means of access is probably not really safe or followed through with properly.
I assume the person changing the bulbs has not used the same bulb for the past 20 clients because the lights are probably different – Work at Heights is no different. It must be site specific.
When we are looking to affect culture positively we find the following is extremely important.
- Certified training – The training cannot be job specific. This training needs to engage the candidate and ensure they understand the principles of all factors at play when working at heights and the different types of solutions they have at their disposal (Not just a harness and lanyard)
- There needs to be a simple system which allows the person performing their duty at height (Keep in mind their duty is not ‘Work at Heights’) to ensure they are safe. We use the ABCs of fall protection. A=Anchor Point; B = Body Support and C = Connector. In reality, if I have these three components and experience a fall, and I have selected the correct ones, I should not hit the ground.
- There must be constant reinforcement of this type of ABC system – Site posters, Toolbox talks, Safety campaigns etc.
- Safety – This is a non-negotiable. The safety of this person must be to remove their risk of Injury or fatality, or else why are we doing this?
- Efficiency – The equipment selected to perform this duty at height needs to be efficient to setup and use. ie. We spoke about a light bulb that takes 2 minutes to change. If you provide the employee with a solution that takes 10 minutes to setup and another 10 minutes to take down it is guaranteed that the employee will use it when you are looking and as soon as safety turns their head they will ‘Quickly do the job’. (This is probably the biggest factor that contributes to the Safety vs. WAH Employee conflict)
- Productivity – The final point of the system being used is that it cannot impede with the task at hand. The same as efficiency of setting up or taking down – if productivity is lost during the use of the system it will very quickly be avoided.
The above are simple ways to ensure we empower the user to make the right decision – through training they are aware that ‘Quickly do the job’ unsafely, is often the reason injuries and deaths occur at heights. They have also been provided with a site specific system which will reduce time spent setting up or using the system whilst removing the risk of falling from heights. We have found this, in general, to be the best way to get ‘buy-in’ from the user.
Changing the culture of safety is a long process but this will be the best way to start the journey.
Feel free to get in touch with your Work at Heights specialist to discuss the types of challenges we have been able to assist in changing the culture of, on sites we have worked with – They may have faced similar issues to you. . – [+27 (0)71 533 6492, Dylan@protekta.co.za]
Tags: Dylan Sutherland, Protekta
Footwear Industry Articles
- Comrades Expo 2026
Durban, KZN, SA – The exhibitor list at the Comrades Expo, from 11-13 June, has shown an evolution in the types of companies exhibiting. Just 1 running footwear supplier, Ikhambi Distribution, promoting its Hoka brand, was there.Technical sock suppliers, however, were well represented, with Balega, Falke, Sox Footwear and The Hirst ...moreSAFLEC AGM 2026: Strengthening of relationships between industry organisations and government a key development
This has been a defining year for the South African Footwear & Leather Export Council (SAFLEC). It has been a year of innovation, collaboration and meaningful progress, where together with our members and strategic partners, we have continued to strengthen the competitiveness of South Africa's footwear and leather industry while creat ...more2026 Comrades shoe count: Asics stays top, Adidas up, Nike slides into 4th place
Marathon shoe counts are among the few footwear statistics available in SA. The Sweat Shop’s Jax Snyman has extracted this year’s Comrades Marathon figures for comparison with last year.His assessment: “Asics up. Adidas properly up. New Balance steady although now 3rd largest. Nike down and drop in rankings to 4th. Sauco ...more
Leather Industry Articles
- ISTT offers free entry level leather course to encourage trainingGrahamstown, E. Cape, SA – The International School of Tanning Technology (ISTT) is offering one of its short online courses, Introduction to the Leather Industry, for free.The course is suitable for entry level tannery staff.It is also suitable for anyone in footwear, leather goods, furniture and upholstery manufacturing, retailing ...moreZimbabwe Leather Development Council lobbies for Government contracts
The Zimbabwe Leather Development Council (ZLDC) is lobbying policymakers to open up public procurement contracts to local leather manufacturers, arguing that Government contracts are essential to reviving the country’s struggling leather value chain.Speaking on the sidelines of the Zimbabwe Industrialisation Conference and Expo (ZIC ...more‘FMD is here to stay – we have to learn to live with it and manage it’
Pretoria, Gauteng, SA – FMD is no longer a series of isolated outbreaks; it has become a national systemic risk, and we need to shift our mindset from emergency response to living with and managing FMD responsibly. The pressure is already showing in the numbers. Our latest figures show cattle slaughter down 12% and sheep slaughter d ...more
PPE Industry Articles
- Indoor air quality monitoring: protecting people, processes, and productivity in South Africa
Indoor air quality (IAQ) is becoming an increasingly important topic across South Africa as industries place greater focus on occupational safety, environmental controls, and operational reliability. While air quality concerns were once mainly associated with mining, heavy industry, or healthcare environments, businesses across multiple s ...moreNew OHS regulations coming into force later this year mean PPE needs to be reviewed, too
In March 2025, the Physical Agents Regulations (and their guidelines) and the Noise Exposure Regulations (and their guidelines) of the OHSAct were published, with an 18-month time-period promulgation date to September 2026, allowing employers time to upgrade their Health & Safety requirements to comply with the new published regulatio ...moreStatistical shape modelling for population-specific respirator design: Addressing fit failure in South African populations
Respirators are widely regarded as the last line of defence against hazardous airborne exposures. Whether protecting healthcare workers from tuberculosis, laboratory personnel from infectious samples, or workers exposed to carcinogenic dusts and fumes, respirators are often relied upon when other controls cannot eliminate exposure. This r ...more
© S&V Publications
